Christmas trees
Moderators: E_, LC addict, FasterThanYou, crwky
- $parechange
- MASTER MEMBER
- Posts: 4195
- Joined: Tue Oct 28, 2008 9:56 am
Christmas trees
How many still have your tree up? We do. I told Kate yesterday I think we should leave it up all year. She does a great job with our tree. It is a Radko tree, has about 100 Radko ornaments that she and I have collected over years. The kids say it's part of their inheratance. We have tried to take pictures, but they don't come out very good.
-
- Better Member
- Posts: 438
- Joined: Mon Oct 27, 2008 3:21 pm
- Marina/Ramp: Knight's Landing
- Location: West Alexandria, Ohio
Re: Christmas trees
I thought about just leaving ours up all year long, but since half the needles were on the floor, I changed my mind!!!
When the Queen is Happy there is Peace in the Kingdom!
Re: Christmas trees
When I bought my house (12 years ago) I went out and got a 7 1/2 ft tree with all the fixin's and ended up leaving it up for 18 months! It hasn't been up since!
Some days I'm the baby, some days I'm the diaper........
- E_
- Site Admin
- Posts: 14818
- Joined: Fri Oct 24, 2008 10:26 pm
- Marina/Ramp: Currently mostly out of Jamestown but spend a lot of time at the other Marinas.
Pre2012-Conley Bottom Mostly, Waitsboro, Alligator I&II ramps, Leesford, Pulaski County Park (when it has water), Grider, State Dock (via boat), and Jamestown are a few places you might find me. - Location: Kentucky (Lake Cumberland)
- Contact:
Re: Christmas trees
We used real trees only and I make sure all Christmas stuff goes down before the clock strikes 12 midnight new years eve.
Buy American, the job you save just might be your own.
Re: Christmas trees
Our tree never comes down before the New Years. Always too busy the week between x-mas and NY. Always had real tree until 2yrs ago. The tree farm near our house closed and we got a fake one. Not the same but I don't miss the mess.
- KYCanuck
- Better Member
- Posts: 441
- Joined: Wed Oct 29, 2008 2:53 pm
- Marina/Ramp: Burnside Marina - Yearly slip
- Location: NKY - Woodson Bend - Somewhere on the lake
Re: Christmas trees
Unfortunately we didn't put ours up at all this year, with the trip to Ontario and all it just didn't seem worth it to put everything up when we weren't here. Next year we are staying home and will have the tree up at the Condo here at the lake all season!
Brrrrr!
The Red Pontiac G8 GT in my Avatar is for Sale - Ask me about it!
The Red Pontiac G8 GT in my Avatar is for Sale - Ask me about it!
- FasterThanYou
- MASTER MEMBER
- Posts: 2068
- Joined: Sat Oct 25, 2008 4:22 pm
- Marina/Ramp: Woodson Bend
- Location: Lake Cumberland
- Contact:
Re: Christmas trees
With the location of your condo in conjunction with the #7 hole I may just decorate that tree with golf balls for you.KYCanuck wrote:Unfortunately we didn't put ours up at all this year, with the trip to Ontario and all it just didn't seem worth it to put everything up when we weren't here. Next year we are staying home and will have the tree up at the Condo here at the lake all season!
Keyboards should be equipped with breathalyzers
- KYCanuck
- Better Member
- Posts: 441
- Joined: Wed Oct 29, 2008 2:53 pm
- Marina/Ramp: Burnside Marina - Yearly slip
- Location: NKY - Woodson Bend - Somewhere on the lake
Re: Christmas trees
Trust me, you wouldn't be the first one! We have enough 'experienced' golf balls to decorate a LOT of trees!FasterThanYou wrote:With the location of your condo in conjunction with the #7 hole I may just decorate that tree with golf balls for you.KYCanuck wrote:Unfortunately we didn't put ours up at all this year, with the trip to Ontario and all it just didn't seem worth it to put everything up when we weren't here. Next year we are staying home and will have the tree up at the Condo here at the lake all season!
Brrrrr!
The Red Pontiac G8 GT in my Avatar is for Sale - Ask me about it!
The Red Pontiac G8 GT in my Avatar is for Sale - Ask me about it!
- FasterThanYou
- MASTER MEMBER
- Posts: 2068
- Joined: Sat Oct 25, 2008 4:22 pm
- Marina/Ramp: Woodson Bend
- Location: Lake Cumberland
- Contact:
Re: Christmas trees
JLA wrote:Can I have mine back??
I know he probably has a few dozen of my Titleist and Calloways in there.
Keyboards should be equipped with breathalyzers
- $parechange
- MASTER MEMBER
- Posts: 4195
- Joined: Tue Oct 28, 2008 9:56 am
Re: Christmas trees
How a Radko is made. This is what makes them the most beautiful and expensive ornaments you can buy.
Creating a Christopher Radko Ornament
A week long process
Millions of Americans have discovered something extraordinary in Christopher Radko® ornaments. Their radiance and originality makes them more a work of art than an ordinary holiday decoration. It is no wonder that Christopher Radko® ornaments are among the fastest growing collectables in the United States.
Each design is crafted by hand using centuries-old processes that require seven days to complete. Cottage workshops in five countries – Poland, Italy, Germany and the Czech Republic – produce the ornaments, finials and garlands that are a part of the complete Christopher Radko®’ collection. More than 3,000 craftspeople skilled in glassblowing, carving, mold making and hand painting contribute their talents to Christopher Radko® designs.
Once a design is conceived, it is submitted to a carver who works from clay or plaster. The carver then gives the approved piece to a mold-maker. Using a Renaissance-era technique, a sand cast mold is created from molten metal. This becomes the mother mold, and the ornament making process can begin.
DAY 1
On the first day of production, the glassblower creates the ornament using clear tempered glass, which is preferred for its notable strength. Other ornament makers have used lower-grade glass, increasing the risk of breakage. There is a noticeable difference in the weight of a Radko® ornament, making it more solid to the touch.
DAY 2
On the second day, the ornament is injected with liquid sterling, another process done by hand. The “silvering” gives the ornaments their luminescence and sets them apart from other glass decorations.
DAYS 3 & 4
On the third day, the base coat of matte lacquer is hand applied: the white on a snowman, for instance, or the red on a Santa.
On the fourth day, a second-coat application of lacquer is applied and adds the ornament’s other vivid colors
DAYS 5
On day five, fine details are hand painted, like the eyes on the Santa and the tiny seeds on a strawberry. With painstaking care, artisans take the ornaments from the realm of decorations to pure works of art. These personalized touches create the charming variations in each ornament making them one-of-a-kind heirlooms. No two ornaments are exactly alike.
DAY 6
On the sixth day, a dusting of glitter is applied to give extra sparkle.
DAY 7
On the seventh and final day, ornaments are inspected to ensure the highest standards of workmanship. Finally, the golden Radko® charm and custom-designed ornament crown, reading “R-A-D-K-O,” are placed on the final design. The ornaments are then tagged and carefully packed for shipment to the states.
Designed and created by skilled artisans with a timeless elegance and beauty, these are finely crafted ornaments to be treasured for many generations to come! More than just decorations, a Radko® ornament is a work of heart.
http://www.christopherradko.com/
Creating a Christopher Radko Ornament
A week long process
Millions of Americans have discovered something extraordinary in Christopher Radko® ornaments. Their radiance and originality makes them more a work of art than an ordinary holiday decoration. It is no wonder that Christopher Radko® ornaments are among the fastest growing collectables in the United States.
Each design is crafted by hand using centuries-old processes that require seven days to complete. Cottage workshops in five countries – Poland, Italy, Germany and the Czech Republic – produce the ornaments, finials and garlands that are a part of the complete Christopher Radko®’ collection. More than 3,000 craftspeople skilled in glassblowing, carving, mold making and hand painting contribute their talents to Christopher Radko® designs.
Once a design is conceived, it is submitted to a carver who works from clay or plaster. The carver then gives the approved piece to a mold-maker. Using a Renaissance-era technique, a sand cast mold is created from molten metal. This becomes the mother mold, and the ornament making process can begin.
DAY 1
On the first day of production, the glassblower creates the ornament using clear tempered glass, which is preferred for its notable strength. Other ornament makers have used lower-grade glass, increasing the risk of breakage. There is a noticeable difference in the weight of a Radko® ornament, making it more solid to the touch.
DAY 2
On the second day, the ornament is injected with liquid sterling, another process done by hand. The “silvering” gives the ornaments their luminescence and sets them apart from other glass decorations.
DAYS 3 & 4
On the third day, the base coat of matte lacquer is hand applied: the white on a snowman, for instance, or the red on a Santa.
On the fourth day, a second-coat application of lacquer is applied and adds the ornament’s other vivid colors
DAYS 5
On day five, fine details are hand painted, like the eyes on the Santa and the tiny seeds on a strawberry. With painstaking care, artisans take the ornaments from the realm of decorations to pure works of art. These personalized touches create the charming variations in each ornament making them one-of-a-kind heirlooms. No two ornaments are exactly alike.
DAY 6
On the sixth day, a dusting of glitter is applied to give extra sparkle.
DAY 7
On the seventh and final day, ornaments are inspected to ensure the highest standards of workmanship. Finally, the golden Radko® charm and custom-designed ornament crown, reading “R-A-D-K-O,” are placed on the final design. The ornaments are then tagged and carefully packed for shipment to the states.
Designed and created by skilled artisans with a timeless elegance and beauty, these are finely crafted ornaments to be treasured for many generations to come! More than just decorations, a Radko® ornament is a work of heart.
http://www.christopherradko.com/