Page 1 of 1

Still working on Pennants

Posted: Tue Mar 31, 2009 6:36 pm
by E_
I had someone over the winter that I was planning on ordering from but I have not been able to contact her for a while. She was theflaglady out of Ohio. Anyway.. I can get cheap ones out of felt for a pretty cheap price but here is the most recent quotes I have for supposedly good durable ones... Personally I am liking the e-mail for Lori after Bob's below...

What say ye?!?

_______________________________________________________________________


Price QuoteMonday, March 30, 2009 4:07 PM
From: "Bob Rasmussen" <bobr@bannersusa.com>Add sender to ContactsTo: e_hillman@



Price quote for 12 to 24 flags

12" x 18" $55.00 each

Dye sublimation printed, two sided construction, with inside liner.

Will sew the flying ends of the flags to the best we can to hold up to your wind conditions.

Best we will be able to do is get them to Catalina and back, not much more performance than that.

Your requirements are outside any normal flag type construction. We can sew and sew, but there are natural limits to all things.

Thank you,



Bob Rasmussen
President
Banners,USA
Phone: (714) 841-2929
Fax: (714) 841-2509
Email: bobr@bannersusa.com
________________________________________________________________-

FW: Quinn Flags Quote #:033109LC 12x18" pennantsTuesday, March 31, 2009 4:58 PM
From: "Lori Clifford" <lori@quinnflags.com>Add sender to ContactsTo: e_hillman

Hello E . Thank you for considering Quinn Flags and giving me the opportunity to quote your project. Here is the information you requested:



Quantity: 3-5 / 12x18” Digitally Printed double sided all- wea the r Dupont nylon pennants is $41.25 each/net

Quantity: 6-11 / 12x18” Digitally Printed double sided all- wea the r Dupont nylon pennants is $27.60 each/net



Finishing: Heading and Grommets



No additional screens or set-up charges apply, regardless of the amount of colors. Cost is based on receiving vector artwork via an .EPS or .AI file. We can assist you with the art if needed. Please visit our website for more information on our art requirements if needed: http://www.quinnflags.com/ArtRequirements.asp



Production takes approximately 10-14 working days. If you have an event date, certain jobs can be done sooner however rush charges may apply.



Shipping is to be determined.



Feel free to email or call me at 800-353-2468 X102 at any time if you have questions, need more information, or would like to place an order. This quote is valid for 30 days.



Thank you and have a great day!



Lori Clifford
Quinn Flags
800-353-2468 x102







Custom printed banners and flags are subject to a variation in quantity.
Custom-made orders are subject to a +/- 10% variance. Orders accepted only on the basis that final invoice will reflect actual quantity delivered and customer agrees to accept and pay for overruns. The printing press can be stopped for the exact amount ordered, however, a premium may be charged. We can also stop the press on the number ordered, however, after quality control, up to 10% may be short which is an option if needed. Custom-made products are non-refundable and cannot be returned. If errors are made at our facility, we stand by our printing quality 100% and will correct the situation in a timely manner. Please note that our Terms and Conditions of Supply, Payment & Returns apply to all orders and are available on our website http://www.quinnflags.com or upon request. Because of all the variables that go into the printing, sewing and finishing of custom and stock products, ALL FLAGS AND BANNERS are subject to a 5% variance in size upon receipt of the product. Feel free to email or call me at 1-800-353-2468 - Ext. 102 and I’d be happy to process your order or answer any questions you may have. Shipping quotes will be as accurate as possible, however, final UPS / Freight invoice will reflect actual shipping cost.
http://www.quinnflags.com/termsConditions.asp

Thank you,

Lori Clifford , Customer Service Rep
Quinn Flags
316 Broadway
Hanover, PA 17331
Office: 717-630-8040 ext. 102
800-353-2468
Fax: 717-630-2661
http://www.quinnflags.com/termsConditions.asp
__________________________________________________________________________________________

Flag this messageRE: Can you make these?Monday, November 10, 2008 3:22 PM
From: "David Saenz" <davids@tentsinmotion.com>Add sender to ContactsTo: E_HILLMAN@

E,

I have made an error in the material description. We would use a polyester material that is double stitched for reinforcement around the edges. This is standard. If we were to double print the flags, the image may be translucent and reversed on the other side. The costs for these would be $550 for 10 units. $1,350 for 30 and $2,000 for 50 units. I could turn it around in 1 week from the date of order. Please let me know if you have any questions.



David Signs

Promotional Design Group

Sales and Marketing
626.579.1772 Office
626.579.5561 Fax
davids@tentswithgraphics.com


_________________________________________________________________________________________


FELT ONES
)))))))))))))))))))))))))))))))))))))0

FW: Can you make these?Monday, November 10, 2008 10:19 AM
From: "Tie L. Savage" <tsavage@crownawards.com>Add sender to ContactsTo: "e_hillman@" <e_hillman@

>Dear E. Hillman:



Thank you for your interest in Crown Awards Team Pennants. This is the information you would need with the specific pricing. Please note that we have a minimum of 100 pieces that must be purchased. Also, just so you know these pennants are made out of felt so they won’t fray. Please view the information I have provided below. If you have additional questions, please let me know.



Here are the prices!



Notes: There is a $40.00 imprint set-up fee, UPS shipping charge determined at time of order; Pennant Stick would be an additional $.20 (16”) or $.30 (33”) cents per piece.



DESCRIPTION
SIZE
100-249
250-499
500-999
1000+

PRPENLG
9” X 24”
2.79
2.39
2.29
1.99

PRPENSM
5” X 12”
1.79
1.49
1.29
.99

PRPS33 (STICK)
33”
.30
.30
.30
.30

PRPS16 (STICK)
16”
.20
.20
.20
.20














Please allow 3-4 weeks for delivery after payment and art approval is received.



Please contact me if you would like to place an order or if you have any questions @

1-800-542-6044 x114.





Sincerely,



Tie



Tie L. Savage
Crown Awards
9 Skyline Drive,
Hawthorne, NY 10532
1-800-542-6044 X:114
tsavage@crownawards.com











______________________________________________________________________________________
RE: Pennant RequestMonday, March 30, 2009 10:36 AM
From: "Bob Hughes" <bob@flags2020.com>Add sender to ContactsTo: E_HILLMAN@ We have boat club that has a custom flag the lettering has been holding up the fly end is coming lose. Your printing goes to the end that and that is what I am worried about. Also I have a new printer that we are going to try. Give me a couple of days and I will let you know. Thanks Bob



From: E Hillman [mailto:e_hillman@]
Sent: Monday, March 30, 2009 8:53 AM
To: Bob Hughes
Subject: RE: Pennant Request



Lake Cumberland is in Southern Kentucky. 36.904023,-85.017029 I am just looking for a good double sided flag with extra stitching on the outter edges.

--- On Mon, 3/30/09, Bob Hughes <bob@flags2020.com> wrote:


From: Bob Hughes <bob@flags2020.com>
Subject: RE: Pennant Request
To: E_HILLMAN
Date: Monday, March 30, 2009, 9:14 AM

No flag will hold up at 60 mph very long. Great looking lake where is this at? I have a place on Lake Travis where we hang out. I will send you a Price In a hour or so. Thanks Bob


From: E Hillman [mailto:e_hillman@]
Sent: Sunday, March 29, 2009 6:40 PM
To: bob@flags2020.com; info@quinnflags.com; info@flagsinternational.com; paul@dicketool.com; joanne@bannersusa.com; Doug@BlowoutBanners.com
Subject: Pennant Request



Can you make these? How much?


http://www.lakecumberlandboaters.com/Pi ... d29f920860


Double: correct on both sides.



They need to be able to handle being on a boat that could run up to 60mph +

I was thinking of a size range around 12" x 18".

I would like to start out with a small order at first to see how they hold up and then there will be possibilites of continued orders.

They will be inland lake boat flags attached are the jpg files. I have clearer BMP files as well.

You should be able to view and download them at:
http://www.lakecumberlandboaters.com/Pi ... _itemId=40
By clicking on them and then right clicking on the image and doing save target as or save picture as...

Regards

E Hillman

Hey you big dummy. :-)

Posted: Tue Mar 31, 2009 8:05 pm
by Lock5
You start a thread wanting to know if we would like a pennant/banner but you do it in a way that nobody can respond to it. I don't think $30-$40 is to much for a custom flag, so I'm in. Now if you want to add my response to your poll that nobody can vote on go ahead. =)) =)) =))

Re: Hey you big dummy. :-)

Posted: Tue Mar 31, 2009 8:47 pm
by Dolphin
Fine by me, Get er done

Re: Still working on Pennants

Posted: Wed Apr 01, 2009 8:15 am
by E_
LOL, I am an idiot. =))


Howabout now?

Re: Still working on Pennants

Posted: Thu Apr 02, 2009 9:07 am
by E_
Are there that few of you intersted or are you all asleep?

Re: Still working on Pennants

Posted: Thu Apr 02, 2009 10:13 am
by Lock5
I voted I wanted one but it didn't add it to the total? #-o

Re: Still working on Pennants

Posted: Thu Apr 02, 2009 11:03 am
by FasterThanYou
I'd like one but I really don't have anywhere to put it unless I keep my anchor light up all the time. :D

Re: Still working on Pennants

Posted: Thu Apr 02, 2009 3:01 pm
by re3too
FasterThanYou wrote:I'd like one but I really don't have anywhere to put it unless I keep my anchor light up all the time. :D
Oh, brother! 8-| 8-|

Re: Still working on Pennants

Posted: Thu Apr 02, 2009 3:02 pm
by FasterThanYou
I guess I could hang it from my............................oh never mind :D

Re: Still working on Pennants

Posted: Thu Apr 02, 2009 3:05 pm
by E_
Lock5 wrote:I voted I wanted one but it didn't add it to the total? #-o
Hmmm, empty your temp internet files and check again.. Or change your vote one way and than back

Re: Still working on Pennants

Posted: Thu Apr 02, 2009 5:55 pm
by Pac22
I have another pennant I'd like to trade even. :D

Re: Still working on Pennants

Posted: Fri Apr 03, 2009 3:49 pm
by MissSwitzerland
LOL!! I just had to post that I thought this thread said "Still working on Penis"!!! :-o

I was starting to get really worried!!!! =))

Re: Still working on Pennants

Posted: Fri Apr 03, 2009 4:07 pm
by re3too
MissSwitzerland wrote:LOL!! I just had to post that I thought this thread said "Still working on Penis"!!! :-o

I was starting to get really worried!!!! =))
Well, sheesh! Easy mistake to make since it was started by E! :ymdevil: :-*

Re: Still working on Pennants

Posted: Sun Apr 26, 2009 7:41 pm
by E_
Just replied to Quinn for 6 of these to be made....
Lake Cumberland Satellite Sillhouete Pennant Black LARGE Complete jpg file not for production.JPG
Lake Cumberland Satellite Sillhouete Pennant Black LARGE Complete jpg file not for production.JPG (54.06 KiB) Viewed 10788 times
And the other side.
Lake_Cumberland_Satellite_Sillhouete_Pennant_Black_LARGE_flipped_Complete_JPEG_image.JPG
Lake_Cumberland_Satellite_Sillhouete_Pennant_Black_LARGE_flipped_Complete_JPEG_image.JPG (56.04 KiB) Viewed 10787 times

FW: Quinn Flags Quote #:033109LC 12x18" pennantsTuesday, March 31, 2009 4:58 PM
From: "Lori Clifford" <lori@quinnflags.com>Add sender to ContactsTo: e_hillman

Hello E . Thank you for considering Quinn Flags and giving me the opportunity to quote your project. Here is the information you requested:



Quantity: 3-5 / 12x18” Digitally Printed double sided all- wea the r Dupont nylon pennants is $41.25 each/net

Quantity: 6-11 / 12x18” Digitally Printed double sided all- wea the r Dupont nylon pennants is $27.60 each/net



Finishing: Heading and Grommets



No additional screens or set-up charges apply, regardless of the amount of colors. Cost is based on receiving vector artwork via an .EPS or .AI file. We can assist you with the art if needed. Please visit our website for more information on our art requirements if needed: http://www.quinnflags.com/ArtRequirements.asp



Production takes approximately 10-14 working days. If you have an event date, certain jobs can be done sooner however rush charges may apply.



Shipping is to be determined.



Feel free to email or call me at 800-353-2468 X102 at any time if you have questions, need more information, or would like to place an order. This quote is valid for 30 days.



Thank you and have a great day!



Lori Clifford
Quinn Flags
800-353-2468 x102







Custom printed banners and flags are subject to a variation in quantity.
Custom-made orders are subject to a +/- 10% variance. Orders accepted only on the basis that final invoice will reflect actual quantity delivered and customer agrees to accept and pay for overruns. The printing press can be stopped for the exact amount ordered, however, a premium may be charged. We can also stop the press on the number ordered, however, after quality control, up to 10% may be short which is an option if needed. Custom-made products are non-refundable and cannot be returned. If errors are made at our facility, we stand by our printing quality 100% and will correct the situation in a timely manner. Please note that our Terms and Conditions of Supply, Payment & Returns apply to all orders and are available on our website http://www.quinnflags.com or upon request. Because of all the variables that go into the printing, sewing and finishing of custom and stock products, ALL FLAGS AND BANNERS are subject to a 5% variance in size upon receipt of the product. Feel free to email or call me at 1-800-353-2468 - Ext. 102 and I’d be happy to process your order or answer any questions you may have. Shipping quotes will be as accurate as possible, however, final UPS / Freight invoice will reflect actual shipping cost.
http://www.quinnflags.com/termsConditions.asp

Thank you,

Lori Clifford , Customer Service Rep
Quinn Flags
316 Broadway
Hanover, PA 17331
Office: 717-630-8040 ext. 102
800-353-2468
Fax: 717-630-2661
http://www.quinnflags.com/termsConditions.asp

Re: Still working on Pennants

Posted: Tue Apr 28, 2009 2:47 pm
by E_
Total for 6 with shipping and handling is 185.40 making 6 cost me $30.90 each.

Who wants one?

I am keeping one :p

If you want me to ship one to you, I am going to be cheap and make you pay shipping and handling since I did not put any markup in the price. The cost is what it is...

She told me in about 4 or 5 days I should have a proof to view and then they will take about 10 days to turn the order around and ship them out.

I will be down Memorial Day weekend and can drop off in Somerset, more than likely will be around Conley and to State Dock at some point.

If more are needed than the 6 I purchased they will be able to spin those around in 10 days or less as well. So as long as someone places their order by May 8th or maybe 11th I should be able to get additional ones down to the Lake in time for Memorial day as well.

Re: Still working on Pennants

Posted: Wed Apr 29, 2009 12:54 pm
by E_
5 left... ;)

Re: Still working on Pennants

Posted: Wed Apr 29, 2009 10:52 pm
by crwky
4 left ;)

Re: Still working on Pennants

Posted: Thu Apr 30, 2009 1:11 pm
by Lock5
3 left :ymapplause:

Re: Still working on Pennants

Posted: Thu Apr 30, 2009 8:28 pm
by E_
waiting on a reply from a couple companies. The one that I had chosen is now trying to charge me $50 for "artwork" that I already did.... arg.

I will still make this happen...

Re: Still working on Pennants

Posted: Fri May 08, 2009 9:32 am
by E_
Well heck, I bit the bullet on the $50 Vector charge. Which added another 8.33 per pennant but if you already asked for one we will stick to the $31.00.

It looks like there are 3 Left, who else wants one???

Re: Still working on Pennants

Posted: Thu May 14, 2009 10:20 am
by E_
Ok, it took them 3 tries for them to even start to copy the images I sent X( , but this third one looks ok and I just sent approval...

I have been told they should still be to me by the 21st.

Regards

E


3rd edit of Pennants
3rd edit of Pennants
Last Edit 60921-LC sm.JPG (132.63 KiB) Viewed 10655 times

Re: Still working on Pennants

Posted: Tue May 19, 2009 9:11 pm
by E_
ttt

Re: Still working on Pennants

Posted: Wed May 20, 2009 6:24 pm
by E_
They are in, if you said you wanted one contact me and tell me how to get it to you.

Regards


Hillman
Lake Cumberland Boater Pennant 5-20-2009 1.JPG
Lake Cumberland Boater Pennant 5-20-2009 1.JPG (42.86 KiB) Viewed 10626 times
Lake Cumberland Boater Pennant 5-20-2009 2.JPG
Lake Cumberland Boater Pennant 5-20-2009 2.JPG (44.35 KiB) Viewed 10627 times

Re: Still working on Pennants

Posted: Thu May 21, 2009 1:46 pm
by E_
LOCK5's has been delivered. THANKS FOR THE BONUS!!! lol

Re: Still working on Pennants

Posted: Wed May 27, 2009 12:23 am
by E_
The first batch have all been delivered (I might have one left if you want it)


Anway you might be able to contact them directly if you want one and have it shipped to you. Just mention you want the flag that was created for PO Number 60921-LC

They are nylon with tyvek inside. I ran mine from Leesburg Ky (Georgetown) to the Lake most of the time at speeds around 70 mph + then all over the lake for days and then back with no frays...


E_HILLMAN wrote:Ok, it took them 3 tries for them to even start to copy the images I sent X( , but this third one looks ok and I just sent approval...

I have been told they should still be to me by the 21st.

Regards

E


The attachment Last Edit 60921-LC sm.JPG is no longer available
Last%20Edit%2060921-LC%20sm.JPG
Last%20Edit%2060921-LC%20sm.JPG (132.63 KiB) Viewed 10590 times
The first batch have all been delivered (I might have one left if you want it)


Anway you might be able to contact them directly if you want one and have it shipped to you. Just mention you want the flag that was created for PO Number 60921-LC

They are nylon with tyvek inside. I ran mine from Leesburg Ky (Georgetown) to the Lake most of the time at speeds around 70 mph + then all over the lake for days and then back with no frays...

Re: Still working on Pennants

Posted: Wed May 27, 2009 11:31 am
by RELAX
E,

I will take one if you have any left!

Re: Still working on Pennants

Posted: Wed May 27, 2009 11:54 am
by E_
There should be one left packaged on the boat. Call, email or IM me and let me know how you want to get it your way.

Re: Still working on Pennants

Posted: Sun Jun 28, 2009 9:46 pm
by E_
Ok, Relax got the last Pennant but you can order one using the info from the order form above if you want one.


Here is a video of mine in action today.

http://s80.photobucket.com/albums/j173/ ... 91646a.flv

or

http://www.facebook.com/video/video.php ... 065&ref=nf


B-)

Re: Still working on Pennants

Posted: Sun Sep 19, 2010 7:34 pm
by E_
E_HILLMAN wrote:Ok, Relax got the last Pennant but you can order one using the info from the order form above if you want one.


Here is a video of mine in action today.

http://s80.photobucket.com/albums/j173/ ... 91646a.flv

or

http://www.facebook.com/video/video.php ... 065&ref=nf


B-)

Found four more today, I kept one for a spare, Lock5 has claimed one, and that leave 2... Let me know if you want one they are right at $40.
If you want more than that there is pricing and contact info above.